1)环氧树脂胶黏剂用选用羧基液体丁腈橡胶、端羧基液体丁腈橡胶、聚硫橡胶、液体硅橡胶、聚醚、聚砜、聚酰亚胺、纳米碳酸钙、纳米二氧化钛等;
1) the use of carboxyl liquid butyl nitrile rubber, carboxyl liquid NBR, polysulfide rubber, liquid silicone rubber, polyether, polysulfone, polyimide, nano calcium carbonate, nano titanium dioxide, etc.
2)酚醛树脂胶黏剂可选用羧基丁腈橡胶、液体丁腈橡胶、聚乙烯醇缩丁醛、聚醚砜、聚苯醚酮。水溶性酚醛树脂以羧基丁腈胶乳、聚乙烯醇作增韧剂。
2) phenolic resin adhesive can be selected from carboxylic nitrile rubber, liquid nitrile rubber, polyvinyl butyral, polyethersulfone and polyphenylene ether ketone. Water soluble phenolic resin is carboxylic nitrile latex and polyvinyl alcohol as toughening agent.
3)快固丙烯酸酯结构胶黏剂常选用丙烯酸酯橡胶、羧基丁腈橡胶、氯丁橡胶、氯磺化聚乙烯、ABS树脂等;
3) fast setting acrylic structural adhesives are often selected from acrylate rubber, carboxylic nitrile rubber, chloroprene rubber, chlorinated sulfonated polyethylene, ABS resin, etc.
4)α-氰基丙烯酸酯胶黏剂宜选用丙烯酸酯橡胶、ABS、SBS、SEBS等;
4) acrylic cyanoacrylate adhesives should be selected with acrylic rubber, ABS, SBS, SEBS and so on.
5)不饱和聚酯树脂胶黏剂宜选用液体丁腈橡胶、聚乙烯醇缩丁醛、聚醋酸乙烯等;
5) unsaturated polyester resin adhesives should be selected with liquid nitrile rubber, polyvinyl butyral, polyvinyl acetate, etc.
6)脲醛树脂胶黏剂可选用聚醋酸乙烯乳液、聚乙烯醇等。
6) urea formaldehyde resin adhesive can be selected as polyvinyl acetate emulsion and polyvinyl alcohol.